Chemical Product Range
Open Circulating Cooling Water Treatments
Product Data (PD) and Safety Data Sheets (SDS) are available upon request
Industry uses large quantities of water for the cooling of its processes. Cooling Towers are for the most prevalent method of achieving this economically and in large volumes.
Whichever Cooling Tower design is used there are three principle objectives in treating cooling water and all are interrelated and can be summarised :-
• To prevent Scale, formation on the heat exchange transfer surfaces
• To prevent Corrosion of metal surfaces in contact with the cooling water
• To prevent Biological fouling organisms or suspended deposits in the cooling water
The Cooling Tower system circuit will comprise of a Cooling Tower, Circulating pumps, Heat Exchangers and connecting pipework.
Cooling Towers are a type of heat exchanger that allows water and air to come into contact with each other to lower the temperature of the process or system water. This allows for a system to cool down and may be in association with other water treatment equipment such as Chillers or Industrial process cooling.
The cooling tower of an open circuit acts as a giant vacuum cleaner, scrubbing the air that is darn into it, retaining the airbourne material within the recirculating water. This is a continuous operation and the suspended matter will build up deposits on the internal surfaces of the system seriously affecting the efficiency of the heat exchangers and the free circulation of the water. At the same time additional deposits caused by corrosion products and microbiological growth within the system will add to the fouling problem. The result of this deposition will be an increased water demand in an endeavour to maintain the design level of heat removal from the system. The introduction of a complete, planned water treatment programme is essential to overcome these problems.
Chemical Treatment Range
|Corrosion Inhibitor||H – 402
H – 403
H – 404
H – 405
|Zinc, Triazole based to prevent against corrosion of metals including copper protection deposit control|
|Scale Inhibition||H – 406
H – 407
H – 408
H – 409
|Phosphonate based treatments “ Threshold “ principle similar to Polyphosphates but without their disadvantages.|
|Scale and Corrosion Inhibitors||H – 410
H – 411
H – 412
H – 414
|Combined scale and corrosion inhibitors with multi-metal with copper protection and deposit control.|
|H – 420
H – 422
H – 424
|Low toxicity scale and corrosion inhibitors molybdate based with multi-metal, corrosion and scale deposit protection with dispersant.|
|H – 430
H – 431
H – 435
|Polymer and Chelant treatments to give extra deposit control.|
|H – 450
H – 451
H – 452
|Polymer treatment with added dispersant for antifoulant deposit control.|
Multi Duty Treatment
|H – 464
H – 465
|Non foaming Amine based treatment for corrosion control and bio control with dispersant action.|
Scale & Deposit Control
|H – 472
H – 474
|Blend of organic and Phosphonate compounds the removal and control of scale deposits.|
|H – 490
H – 494
Anti-foam prevention and forming.
If you wish to obtain data sheets on this particular product, or to get advice or more details, just fill out the form below
Request further product information
The full range of HydroChem Services:
Water Treatment - Industrial
We are leading supplier of Legionella compliance services, water hygiene risk assessment, water treatment, installations and maintenance.
Water Treatment - Domestic
Assessing systems that may pose a risk to exposure to legionella, including humidifiers, air washers, emergency showers and indoor ornamental fountains.
Ensuring all commercial premises have a statutory duty to control the risk of legionella bacteria in water systems.
Protecting the public from hazards associated with bacteria in water systems particularly Legionella.
We offer an extensive range of water treatment chemicals to suit all processes and requirements.
Chemical Cleaning & Disinfections
We have dedicated teams of experienced engineers to diagnose and give site specific recommendations.
Plant & Equipment
We offer a vast range to ensure that processes are effectively operated to their maximum advantage and costs.
After a Legionella risk assessment, it is likely that corrective or improvement works are required to bring your system up to compliance.
Air & Surface Remediation
Our protocols allow a building or site be kept clean, environmentally sound and free of contamination.
We sell a range of products to assist with water treatment, to both industrial and individual customers.